中文版
Hanma Laser senior fiber laser cutting machine engineer talks about the causes and solutions of burrs
During the working process of fiber laser cutting machine, occasionally there will be the occurrence of burrs on the workpiece, which will affect the quality of the workpiece. The senior experienced Hanma Laser engineers tells you the causes and solutions of the burrs.
There is a problem with the laser head spot, and the spot energy is not uniform. The solution is to adjust the collimator or focus mirror to make the spot round and the energy evenly distributed to form a good cutting effect.
1. There is a problem with the laser head spot, and the spot energy is not evenly focused. The solution is to adjust the collimator or focus lens to make the spot round and the energy evenly distributed to form a good cutting effect.
2. The focus of the laser beam is wrong, and the upper and lower positions are deviated. In this case, the laser head is adjusted according to the offset position to make the focus position suitable and achieve good cutting quality.
3. The laser cutter has insufficient output power, resulting in burrs. The handling of this situation is a little complicated. First, check that the laser head mirrors whether dirty or not (two sets of mirrors), or that the lens is damaged (small cracks). Problems with the lens may affect the transmission of laser power. The second is to set the cutting parameters reasonably, such as the output power. During the working process of the laser cutting machine, the output power of the laser should be adjusted according to the processing material and thickness to fully exert the performance of the laser cutting equipment.
4. The processing speed is unreasonable. The acceleration performance of the laser cutting machine is very important. Sometimes we want to make the cutting speed high in order to pursue the processing efficiency, or cut it very slowly in order to pursue the quality. If it is too fast or too slow, it may produce burrs. The solution is to choose the processing speed reasonably, or according to the cutting parameters provided by Hanma laser, cut according to the parameters to solve the burr phenomenon.
5. The auxiliary gas of the fiber laser cutting machine is not pure enough, or the amount of gas is too small, and burrs are formed.
Let us first get acquaintance with the auxiliary gas. The auxiliary gas is blowing off the slag on the surface of the workpiece in the case of air isolation, forming a good cutting, if the gas is not pure or the amount of gas is insufficient, and the slag is not inspected in time, there will cause burrs, if this problem cccurd, improve the gas purity (replace the gas supplier), or try to increase the gas flow when cutting.
Above reasons and solutions of the cause of burrs, with the equipment + gas + parameters, adjusted to the best, will be able to cut out the burr-free workpiece, only when we mastered the performance of the laser cutting machine, familiar with the various cutting parameters provided by the manufacturer, can we maximize the economic benefits.
binance Sign Up
August 4, 2021Can you be more specific about the content of your article? After reading it, I still have some doubts. Hope you can help me.
binance referal code
August 4, 2021Thank you for your sharing. I am worried that I lack creative ideas. It is your article that makes me full of hope. Thank you. But, I have a question, can you help me?
binance napotitev
August 4, 2021I don’t think the title of your article matches the content lol. Just kidding, mainly because I had some doubts after reading the article.
www.binance.com註冊
August 4, 2021Thanks for sharing. I read many of your blog posts, cool, your blog is very good. https://www.binance.com/zh-TC/register?ref=PORL8W0Z
bir binance hesabi acin
August 4, 2021Thank you for your sharing. I am worried that I lack creative ideas. It is your article that makes me full of hope. Thank you. But, I have a question, can you help me? https://www.binance.com/tr/register?ref=PORL8W0Z
създаване на профил в binance
August 4, 2021I don’t think the title of your article matches the content lol. Just kidding, mainly because I had some doubts after reading the article. https://accounts.binance.com/bg/register-person?ref=P9L9FQKY
Kayıt Ol
August 4, 2021At the beginning, I was still puzzled. Since I read your article, I have been very impressed. It has provided a lot of innovative ideas for my thesis related to gate.io. Thank u. But I still have some doubts, can you help me? Thanks.
gate.io
August 4, 2021I may need your help. I tried many ways but couldn’t solve it, but after reading your article, I think you have a way to help me. I’m looking forward for your reply. Thanks.
gate.io行情
August 4, 2021Reading your article has greatly helped me, and I agree with you. But I still have some questions. Can you help me? I will pay attention to your answer. thank you.
gateio güvenilir mi
August 4, 2021This article opened my eyes, I can feel your mood, your thoughts, it seems very wonderful. I hope to see more articles like this. thanks for sharing.
binance us
August 4, 2021Thanks for sharing. I read many of your blog posts, cool, your blog is very good.
Реферальный код на binance
August 4, 2021Your point of view caught my eye and was very interesting. Thanks. I have a question for you.
Registrera dig
August 4, 2021Can you be more specific about the content of your article? After reading it, I still have some doubts. Hope you can help me.
جهاز قياس وزن الشاحنة العراق
August 4, 2021BWER Company provides Iraq’s leading-edge weighbridge solutions, designed to withstand harsh environments while delivering top-tier performance and accuracy.
binance Inscreva-se
August 4, 2021Thanks for sharing. I read many of your blog posts, cool, your blog is very good.
bezplatn'y úcet na binance
August 4, 2021Thanks for sharing. I read many of your blog posts, cool, your blog is very good.
注册以获取100 USDT
August 4, 2021Thank you for your sharing. I am worried that I lack creative ideas. It is your article that makes me full of hope. Thank you. But, I have a question, can you help me?
binance
August 4, 2021Can you be more specific about the content of your article? After reading it, I still have some doubts. Hope you can help me.
Vytvorení úctu na binance
August 4, 2021Your point of view caught my eye and was very interesting. Thanks. I have a question for you.