中文版
Proper maintenance and maintenance of a laser machine
When they using the laser cutting machine many customers do not know how to do the maintenance and cause the accelerating in aging of the machine. Now Hanma Laser gives you some tips on how to maintain a laser machines.
- Water and water tank cleaning
Recommendation: Clean the tank and replace the circulating water once a week.
Note: The laser tube must be filled with circulating water before working.
The water quality and water temperature of the circulating water directly affect the service life of the laser tube, it is recommended to use pure water. and the water temperature is controlled below 35 °C. If it exceeds 35 °C, it needs to replace circulating water, or add ice cakes to the water to lower the water temperature. (It is recommended that customers choose a cooler or use two water tanks)
Cleaning the water tank: turn off the power first, unplug the water inlet pipe and let the water in the laser tube automatically flow into the water tank. Open the water tank, take out the water pump, and remove the dirt from the water pump. Clean the water tank and replace the circulating water, return the water pump to the water tank and insert the water pipe connected to the water pump into the water inlet. Arrange the joints. Power on the pump separately and run for 2-3 minutes. (Fill the laser tube with circulating water) - Laser fan cleaning
The long-time use of the fan will cause a lot of solid dust and debris to accumulate inside, cause the fan to generate a lot of noise, which is not conducive to exhaust and deodorization. When the fan suction is insufficient and the smoke exhausting is not good, turn off the power first, remove the air inlet and outlet pipes from the fan to remove dust and debris, then turn the fan upside down, pull the blades inside, clean with a rag, and install the fan well. - Lens cleaning
It is recommended to clean before work every day, and the machine must be turned off before doing the cleaning.
There are 3 mirrors and 1 focusing lens in the engraving machine (No. 1 mirror is located at the exit of the laser tube, that is, the upper left corner of the machine, the second mirror is at the left end of the beam, the mirror No. 3 is located at the top of the fixed part of the laser head, and the focusing lens is located in the adjustable barrel of the lower part of the laser head).
gate io türkiye
August 4, 2021After reading your article, it reminded me of some things about gate io that I studied before. The content is similar to yours, but your thinking is very special, which gave me a different idea. Thank you. But I still have some questions I want to ask you, I will always pay attention. Thanks.
gate io borsası
August 4, 2021At the beginning, I was still puzzled. Since I read your article, I have been very impressed. It has provided a lot of innovative ideas for my thesis related to gate.io. Thank u. But I still have some doubts, can you help me? Thanks.
gateio
August 4, 2021The point of view of your article has taught me a lot, and I already know how to improve the paper on gate.oi, thank you. https://www.gate.io/uk/signup/XwNAU
Ouvrir un compte Binance
August 4, 2021Your article helped me a lot, is there any more related content? Thanks! https://accounts.binance.com/ur/register-person?ref=WTOZ531Y
www.binance.com注册
August 4, 2021Thank you for your sharing. I am worried that I lack creative ideas. It is your article that makes me full of hope. Thank you. But, I have a question, can you help me?
جهاز قياس وزن الشاحنة العراق
August 4, 2021BWER Company provides Iraq’s leading-edge weighbridge solutions, designed to withstand harsh environments while delivering top-tier performance and accuracy.
binance us register
August 4, 2021Your point of view caught my eye and was very interesting. Thanks. I have a question for you.
binance
August 4, 2021Thanks for sharing. I read many of your blog posts, cool, your blog is very good.
Binance US Pagpaparehistro
August 4, 2021Your article helped me a lot, is there any more related content? Thanks!